Task guide / PC 1.0 · community routes
Focus Fire Enhancer: clear the furniture below the monitor
Focus Fire Enhancer is in a hidden room off the laser-trap Fragment Zone. At the red-lit section, enter the room on the left and destroy the furniture beneath its monitor; the community route shows a sofa hiding the gap. A grenade clears it. Crouch through and take the schematic.
Updated 2026-11-10 · PC 1.0 · community routes
Follow these steps
Find the red-lit section's left room
Advance along the laser-trap corridor until you reach the red-lit area, then enter the side room on the left. Use the room and monitor as your landmarks; the pickup is not out in the laser corridor.
Open full-size image ↗The side room is on the left in the red-lit section. Clear the furniture beneath the monitor
Break the furniture under the wall monitor to expose the low passage. The community route uses a grenade to clear the sofa. This image shows the area after clearing it, so do not expect the furniture still to be intact in the picture.
Open full-size image ↗The opening below the monitor is visible after clearing the furniture. Focused view; open the full image for context. Crouch through to the pickup
Enter the exposed gap at floor level and collect Focus Fire Enhancer in the room beyond. Clearing the furniture makes the route accessible but does not itself award the schematic.
Open full-size image ↗The schematic waits beyond the hidden opening.
Completion signal
Collect the schematic in the hidden room beyond the monitor-side passage.
What the module does
Increases damage while aiming down sights.
If it does not work
If you are checking the wrong wall, return to the red-lit section and take its left room. Clear the furniture below the monitor rather than treating the screen itself as the target. If the layout lacks that room and monitor, identify the Fragment Zone variant again.
Related guides & sources
Sources and version notes
Directions use community reports and accompanying images, including early-access screenshots whose numerical values can differ from your current version. Map positions can vary; these are not firsthand 1.0 route tests.